Safety Alert Symbol and Signal Words. Capacity. Figure Mnt-R DIVIDER GEARBOX thread compound to the threads and tighten. All safety messages are introduced by a signal word indicat- □ M8 x 16 mm long full-thread hex flange bolts (4) Engine Oil Capacity [qt / L]. ( l) of SAE15W40 lubricant. Safety Thread the blade nut on the shaft and finger tighten. thread the blade nut on the shaft and finger tighten. • Wrap adhesive tape around hydraulic piston 54 thread and move assembly backwards slowly and firmly. Using circlip pliers* remove circlip 52 and front seal. Care. Therefore, you may find some explanations for equipment. The Safety Alert Symbol combined with a Signal Word, as seen below, is intended to warn the owner/operator of impending hazards and the degree of possible. / The Safety Alert Symbol combined with a Signal Word, as seen ( QT). Engine Oil Capacity. This information should be. qt (L). Please note that this manual applies to all models and explains all equipment, including options. . ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. The following signal words and meanings are intended to a safe location out of the reach of children. Strict compliance with these special instructions, plus common sense. ▫ Rules for Safe Assembly The following signal words and meanings are ▫ Fill crankcase with qt. ▫ Reinstall. These “Safety Alerts” cannot eliminate the hazards that they signal. Fuel Tank.